Bringing an 82 CS-250 back to life....

Have you rescued a stray from the dumpster or wood pile? Got tips that will help us keep our sweethearts jammin'? Show us here!
Post Reply
User avatar
Crusty
Virtuoso
Posts: 2328
Joined: Sun 15 Jan 2006 04:52 PM
Location: Absolute Stupidity, Missouri
Contact:

Bringing an 82 CS-250 back to life....

Post: # 81383Post Crusty »

Snagged this on eBay as a husk (no pickups or pickup rings). All the other electronics were still there. This is what I started out with.
back.jpg
front.jpg
On the bench it went. Touched up the scratches and dings (not as many as you would think) and cleaned and polished the bridge and saddles. I bought some 15:1 covered gear (semi-closed) tuners for it but turns out in 40 years they manufacturers are now putting the mounting holes on the opposite corners. I went through pages and pages on Amazon and zip. I had a set of mini 15:1 sealed tuners with keystone buttons. I decided the keystones didn't look right for a Cardinal so I replaced them with a set identical to the originals I had bought for another project and never used. I didn't bother trying to fill and hide the original tuner holes, after all it is over 40 years old.

Some years ago I was a huge fan of the MMK45 pickups but not so much any more. I prefer the MMK53 now (think PE-R60). As there were no pickups with this I installed a set of Duncan Designed HB103s (Duncan Mayhem clones) I had sitting around and they sound GREAT. I'm not much of a fan of out of phase and the coil cut on the Cardinals cut the same coil in each pickup. I removed the original switches (keeping them intact) and added separate coil cuts for each pickup. The bridge I cut the north coil and neck the south so with both on coil cut mode I get that chimey frequency cancellation you would expect from say the 2nd and 4th pickup selector position you'd have on a Strat. I love how the Cardinals play. They almost play themselves. The neck is perfect and frets are almost 100%.

Here are the finished shots:
full_web.jpg
hs_web.jpg
neckplate_web.jpg
Kmaxpe1500
Virtuoso
Posts: 290
Joined: Mon 19 Apr 2021 07:23 AM

Re: Bringing an 82 CS-250 back to life....

Post: # 81384Post Kmaxpe1500 »

That looks great! How did you get the chrome to look so good?
User avatar
Barry
Virtuoso
Posts: 4042
Joined: Wed 29 Apr 2009 12:32 PM
Location: St. Catharines, Ontario Canada
Contact:

Re: Bringing an 82 CS-250 back to life....

Post: # 81385Post Barry »

Shwe-e-e-t! :up:
"A little song, a little dance. A little seltzer down your pants." -Chuckles the Clown
Guitars: https://legend.barryeames.com
Music/Pix/Videos: https://getback.barryeames.com
User avatar
Jorg
Virtuoso
Posts: 3221
Joined: Sat 25 Mar 2006 09:25 PM
Location: Grand Absurdity, TX

Re: Bringing an 82 CS-250 back to life....

Post: # 81386Post Jorg »

:love:
Quality service since 3:00 last Tuesday
User avatar
Crusty
Virtuoso
Posts: 2328
Joined: Sun 15 Jan 2006 04:52 PM
Location: Absolute Stupidity, Missouri
Contact:

Re: Bringing an 82 CS-250 back to life....

Post: # 81387Post Crusty »

Kmaxpe1500 wrote:That looks great! How did you get the chrome to look so good?
Nevr-Dull and elbow grease.
Kmaxpe1500
Virtuoso
Posts: 290
Joined: Mon 19 Apr 2021 07:23 AM

Re: Bringing an 82 CS-250 back to life....

Post: # 81388Post Kmaxpe1500 »

Crusty wrote:
Kmaxpe1500 wrote:That looks great! How did you get the chrome to look so good?
Nevr-Dull and elbow grease.
:thanks:
User avatar
Frenchy
Virtuoso
Posts: 2480
Joined: Sat 08 Nov 2008 01:35 PM
Location: Rock City Canada

Re: Bringing an 82 CS-250 back to life....

Post: # 81657Post Frenchy »

Nice work on the CS !

On the chrome also. :up:
MAA Member since June 29th 2009, taking one baby step at a time..... and failing miserably!
Post Reply

Return to “Resurrections and Restorations - All Makes and Models”